1)
Insert
jack 1
into the Sensor Pad and twist it clockwise to lock it.
6
5
4
3
2
1
2.2 - SELECT THE CRIB LEG TO SECURE THE CORD COVERS
6
5
4
3
2
1
6
5
4
3
2
1
Figure 1
Figure 2
RECOMMENDED
OR
Use the crib leg by the wall closest to the Nursery Unit
(Figure 1)
. In cases where the
Nursery Unit is across the room, use the leg closest to the Nursery Unit to position the
covered wire
(Figure 2)
. It is always preferable that the covered cord run along a wall.
2.3 - INSTALL THE SENSOR PAD ON THE MATTRESS SUPPORT
IMPORTANT
If your crib does not have a solid, stable surface for the Sensor
Pad, you will need to place a support under it, to ensure correct
operation of the system.
This hardboard support should be at least 6 mm thick and should
have minimum dimensions of 13’’ x 13’’ (33 x 33 cm). This support
board must be larger than the Sensor Pad surface area.
The Sensor Pad functions with any size and type of mattress except memory-foam
mattresses, hollow frame mattresses and water beds. The hardboard maintains a
constant pressure on the Sensor Pad, enabling it to detect the baby’s movements even
when the baby is at the edges of the crib.
Hardboard
9
E
N
01m8_Manuel_AC115_NA_12657_AMEND.indd 9
28/07/2017 16:12
Summary of Contents for AC115
Page 1: ...OWNER S MANUAL Model AC115 Baby Sound and Movement Monitor EN 2 FR 27 ES 53 ...
Page 26: ...26 ...
Page 27: ...MANUEL DE L UTILISATEUR Modèle AC115 Moniteur de sons et de mouvements pour bébé FR 27 ES 53 ...
Page 53: ...MANUAL DE USUARIO Modelo AC115 Monitor de sonidos y movimientos de bebés ES 53 ...
