67
1.6 TEMPERATURE
The baby’s room temperature is always indicated on the top
bar of the screen. By setting the temperature alarm, you will
be alerted if the room temperature is too cold or too hot. If
the temperature that you have set goes out of range, 4
consecutive beeps will be heard every 4 seconds and the
temperature alarm icon will be displayed in the center of the
LCD screen.
Press on the THERMOMETER icon on the MAIN MENU, then
press the “+” and “-” for the temperature settings.
1. Maximum temperature is between : 15 and 32° Celsius /
59 and 0° Fahrenheit.
2. Minimum temperature is between : 5 and 20° Celsius/ 41
and 68° Fahrenheit.
3. The range between the minimum and maximum
temperature is 4° C / 7° F.
An error tone will be heard if you try to set it up below
this range.
4. Press key at the left bottom corner of screen to switch the
temperature scale to Fahrenheit or Celsius. The scale you
selected will be indicated above the key.
5. If the temperature alarm is set ON, the word “ON” will
appear above the alarm icon and the thermometer will
appear on top of the video screen bar.
6. Press OK to confirm setting.
Note:
If the temperature goes below 0°C (32°F) or over
45°C (113°F) the top bar will display
LO
(low) or
HI
(high)
instead of the room temperature.
TEMPERATURE
ALARM ICON
TEMPERATURE
ICON
To start the TIMER, press the TIMER icon located on the
MAIN MENU.
1. The screen will display the baby’s room and the timer.
2. The timer runs from 0:00 (0 hours and 00 minutes) to a
maximum of 5 hours and 59 minutes.
3. After showing “5:59”, it will then stop automatically and
disappear from video display.
Note:
When Parents Unit is turned OFF, the timer will
automatically reset and turn OFF.
1.7 TIMER
TIMER ICON
TIMER DISPLAY
E
N
AC1100 BELGIUM 13.07.2012 13-05-02 5:07 PM Page 67
