66
The Tic function is related to the movement Sensor Pad and
is only available when the movement function is activated.
It emits a sound on the Parents Unit with every movement
of the pendulum telling you that the movement function is
on.
1. Push Icon to activate or deactivate.
2. Press OK to confirm.
Pendulum movement will appear on the top bar
of the Parents Unit screen.
TIC
ICON
1.3 TIC
To pause your monitor, press in center of the 'HOLD' icon key.
1. When the unit is set into 'hold' mode, movement
detection and alarm are disabled.
2. Parents Unit speaker emits 3 consecutive beeps every 30
seconds as a reminder that the monitor in on 'HOLD'
mode.
3. Press icon key to return to normal video display.
4. You can also put the unit on HOLD by pushing the top
button of the Nursery Unit for at least 2 seconds and
return to normal operations by pushing it again.
Note:
When the Monitor is on HOLD the Nursery Unit night
light blinks.
The video monitor function is activated when you receive
your Angelcare
®
Monitor. If you wish to disable this function,
press the VIDEO icon then press OK to confirm the setting.
1. The VIDEO icon will appear on the LCD screen when the
video function is OFF.
2. To retrieve the video monitor function, press the MENU
icon at the right bottom of the screen to go into the MAIN
MENU, then press the VIDEO icon.
3. Press the OK to confirm the setting.
MENU icon
VIDEO icon
Night Light
will blink
HOLD
ICON
VIDEO
ICON
1.4 VIDEO
1.5 HOLD
E
N
AC1100 BELGIUM 13.07.2012 13-05-02 5:07 PM Page 66
