Installation Guide
Angel Armor Avail ballistic door panels (Level III) FOR DODGE CHARGER PURSUIT
970 235 2961 [email protected]om angelarmor.com
8
INSTALLATION
This section provides instructions
for installing Angel Armor Avail
Ballistic Door Panels (Level III)
into the Dodge Charger Pursuit
(2011 & Newer Models).
Overview
Installation of the Angel Armor Avail Ballistic
Door Panel (Level III) into a Dodge Charger
Pursuit is simple and starts with applying
the OEM door hinge reinforcements. Door
disassembly is required to install the crash bar
brackets and armor mounting bracket. Once this
is completed, the armor is secured in place and
the vehicle door panel is quickly reassembled.
See page 9 for detailed instructions.
General Installation Procedure
1
Install the OEM hinge reinforcement
and check strap.
2
Remove the weatherstrip, vehicle door
panel, speaker and window.
3
Remove the inner door panel.
4
Insert and secure the Avail ballistic panel.
5
Re-assemble the door.
Important Notes
The directions, photographs and illustrations
in this guide depict an installation performed
on the driver’s side. The same installation
procedure applies to the passenger door.
Note the location of screws, fasteners, wires
and door components before disassembling
to aid proper re-assembly after panel
installation.
Place all removed hardware and components
in a safe place or magnetic tray during
installation.
The Avail Level III armor panel is made of a
premium steel plate. This protective material
is heavy, and extra caution should be taken
when transporting, handling and installing
the armor.
Firm pressure may be needed to clear
minor obstructions during insertion of the
ballistic panels but never use excessive force.
Excessive force may damage internal door
components.
