Installation Guide
Angel Armor Avail ballistic door panels (Level III) FOR DODGE CHARGER PURSUIT
970 235 2961 [email protected]om angelarmor.com
21
Replacing the Speaker
and Vehicle Door Panel
CONTINUED
13
Use a Phillips screwdriver to replace the
screw attached to the rubber bumper at
the lower, outer edge of the door panel.
14
Push in the black plastic fastener near
the middle of the inner edge of the door
panel.
15
Connect the window control panel wiring
harness.
16
Replace the window control panel.
17
Use a Phillips screwdriver to replace
the screw at the bottom of the armrest
pocket.
18
Replace the trim cover at the bottom of
the armrest pocket.
19
Use a Phillips screwdriver to replace the
screw behind the interior door handle.
20
Replace the trim cover behind the interior
door handle.
21
Reconnect the vehicle battery.
22
Roll the window all the way down.
Replacing the Window Weatherstrip
1
Press down on the front end of the
weatherstrip and move backward,
pressing the entire length of the
weatherstrip into the window frame to
ensure proper snap engagement.
2
Use a T25 driver to replace the front and
back window weatherstrip screws.
