Clue: ‘
○
’ means that the hard disk is normal. ‘X’ means that the hard disk is
broken-down. ‘-‘ means that there is no hard disk. If the user needs to
change the damaged hard disk, you must shut down the XVR and take
up all the damaged hard disks, then install a new one. Behind serial
number means the current working disk such as ‘1*’. If the
corresponding disk is damaged, the information will show “?”.
4.6.2 BPS
Display the code stream(Kb/S) and hard disk capability (MB/H) in real time. It
displays as the wave sketch map.
Figure 4.54 BPS
4.6.3 LOG
Look up system log according to the set mode. Log information include:
system operation, configuration operation, data management, alarm affair,
recording operation, user management, and file management and so on. Set
the time section to look up and click the look up button. The log information will
display as a list. (One page is 128 items) Press Page up or Page down button
to look up and press delete button to clear all the log information.
62
