4.4.6 PTZ Setup
Figure 4.29 PTZ setup
<Channel> Choose the dome camera input channel.
<Protocol> Choose the corresponding dome protocol. (PELCOD as an
example)
<Address > Set as the corresponding dome address. Default: 1. The address
must be consistent with the dome address.
<Baud rate> Choose the corresponding dome baud rate length. You can
control the PTZ. Default: 115200.
<Data bits> Include 5-8 options. Default: 8.
<Stop bits> Include 2 options. Default: 1.
<Parity> Include odd check, even check, sign check, blank check. Default:
void.
48
