<Channel> Select channel title;
<Enable> Open digital channel, tick enable, then can do related settings;
<Time Synchronization> Tick it means the time of this channel and device is
the same.
<Connection Mode> can be singe connect or multi-ink, multi-link modes can
connect to several devices, device will be tour displayed one by
one, tour interval can be set, no less then 10s;
<Delete>
<Add>
If the user want to change device, select the existing device,
click delete will be ok.
Click add will come out below page to add new device:
Figure 4.36 Remote Access Configuration
<Configur. Name> Device is with default config title, users can revise it as
you like;
<Device Type> There are three types: IPC, DVR, HVR, the user can choose
as what you like, default is IPC;
<Protocol>
System default is TCP protocol;
<Remote Channel> Users can input remote channel title from the device that
you want to connect remotely;
<Stream>
User can input remote channel title from the device that you
want to connect remotely;
<Device address> IP address of device;
<Port>
Default is 34567;
<User name> Default is admin;
52
