18
SINGLE ESPRESSO GRINDER
Checking the grinder and scope of delivery
NOTE!
Risk of damage!
The grinder can be damaged if the packaging is opened carelessly
with a sharp knife or other pointed object.
– Be very careful when opening.
1. Remove the grinder from its packaging.
2. Check that the delivery is complete (see
Fig. A
,
B
and
G
).
3. Check for damage to the grinder or any of the individual parts.
If this is the case, do not use the grinder. Contact your supplier (see
“Maintenance and service” sec on).
Se ng up the grinder and inser ng the bean container
You will need a slot screwdriver to
fi
x the bean container (not
supplied).
1. Place the grinder on a level and stable surface that does not vibrate.
2. Make sure that the grinder is switched o
ff
(On/O
ff
switch
(5)
and start bu on
(8)
to posi on 0) and connect the grinder to the power supply by inser ng
the power plug into a properly installed earthed socket (see
Fig. A
/
B
).
3. Place the drip tray
(10)
into the corresponding casing recess below the
dispensing chamber
(3)
.
4. Make sure that the rubber ring
(18)
has been properly inserted in the
bean container intake
(2)
and is lying
fl
at (see
Fig. G
).
5. Posi on the bean container
(1)
on the bean container intake.
When posi oning the bean container intake, ensure that the nose of
the bean container is located in the corresponding recess in the bean
container intake.
6. Push the bean container down slightly into the bean container intake and
rotate the bean container clockwise to lock it in place on the grinder.
Summary of Contents for AE 65 V
