Anets SLG100 Installation And Operation Manual Download Page 2

 
 

 

THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE 

 

 

 
 
 
 
 

TO THE PURCHASER 

Post, in a prominent location, the 
instructions to be followed in the event that 
an operator smells gas. Obtain this 
information from your local gas supplier. 

 

WARNING 

There is an open flame inside this appliance. 
The unit may get hot enough to set nearby 
materials on fire. Keep the area around the 
appliance free from combustibles. 

 

WARNING 

DO NOT

 supply the appliance with a gas 

that is not indicated on the data plate. If you 
need to convert the appliance to another 
type of fuel, contact your dealer. 

 

WARNING 

DO NOT 

use an open flame to check for 

gas leaks! 

 

WARNING 

If gas flow to appliance is interrupted, or pilots 
extinguish, wait 5 minutes before attempting to 
relight the pilot to allow any residual gas in 
appliance to dissipate. 

 

WARNING 

Ensure that the appliance can get enough air to 
keep the flame burning correctly. If the flame is 
starved for air, it can give off a dangerous carbon 
monoxide gas. Carbon monoxide is a clear 
odorless gas that can cause suffocation. 

 

WARNING 

 

Adequate means must be provided to limit the 
movement of this appliance without depending on 
the gas line connection. Single appliances 
equipped with legs must be stabilized by installing 
anchor straps. All appliances equipped with  

 

 

casters must be stabilized by installing restraining 
chains. If a flexible gas line is used, an additional 
restraining cable must be connected at all times 
when the appliance is in use. 

 

WARNING 

An appliance equipped with casters and a flexible 
gas line must be connected to the gas supply with 
a quick disconnect device. This quick disconnect 
must comply with AS4631. To limit the movement 
of the appliance without depending on the 
connector or quick disconnect, a restraining cable 
must also be installed. 

 

WARNING 

Installation of this appliance must be done by a 
qualified professional. This appliance should be 
inspected by a qualified professional on an annual 
basis to insure safe and proper operation. 
 

WARNING 

This appliance must be installed in compliance 
with AS 5601 (current revision) or local codes, as 
applicable. 
 

WARNING 

If the appliance has a power supply, it must be 
disconnected before servicing or cleaning this 
appliance. 

WARNING 

Do not attempt to move this appliance when the 
unit is at operating temperature. Serious personal 
injury could result if skin comes in contact with the 
hot surfaces. 

 

WARNING 

DO NOT sit or stand on this appliance. Serious 
injury could result from falling or contact with hot 
shortening/oil. 

FOR YOUR SAFETY 

DO NOT store or use gasoline or other flammable vapors or liquids in the 
vicinity of this or any other appliance. Do not spray aerosols in the vicinity of 
this appliance while it is in operation. 

WARNING 

Improper installation, alteration, service or maintenance can cause property 
damage, injury or death. Read the installation, operating and maintenance 
instructions thoroughly before installing or servicing this equipment. 

Summary of Contents for SLG100





















Reviews: