Anest Iwata DVSL-100C, Instruction Manual

Page: 26 / 31

-24-
5.2 Maintenance
When maintenance interval has elapsed, be sure to contact our distributor who sold
it to you. This vacuum pump requires maintenance conducted only by our authorized
specialist.
Never try to disassemble, reassemble or alter on user’s side. We are not responsible
for any accidents caused by disassembly, reassembly or alteration which was done
by the user or non-specialist.
Maintenance interval
W h e r e t o i n s p e c t
Yearly
（
8,000 h
）
Biennially
（
16,000 h
）
triennially
（
24,000 h
）
4th years
（
32,000 h
）
Angular contact Ball bearing set - Grease /
△ - ○
Pin crank set Grease /
△
Grease /
△
Grease /
△ ○
Duplex arrangement angular ball
bearing set [Housing]
-
Grease /
△ - ○
Roller bearing set [OS]
Grease /
△
Grease /
△
Grease /
△ ○
Spider
○ ○ ○ ○
P-seal [FS set]
○ ○ ○ ○
Tip seal FS
○ ○ ○ ○
Tip seal OS
○ ○ ○ ○
O-ring [Inlet flange]
○ ○ ○ ○
Air-flush kit
○ ○ ○ ○
○・・・
Replace
△・・・
Replace if something goes wrong.
Note 1
：
Be sure to use designated DVSL exclusive grease.
Note 2
：
You must shorten maintenance standard when pumping vapor since vapor temperature ,
disposal volume, disposal frequency and substances in vapor have influence on pump
operation.
Note 3
：
The maintenance interval should be earlier one in either the period or running hours.
Note 2
：
When you want further
operation after either the 4
th
year or 32,000 operating hours, please
contact our distributor who sold it to you.
Important
Causes of failure
Shorten maintenance interval if conditions of installation or operation are unfavorable.
In particular, ambient temperature has a great influence on failure. Maintenance interval is based on an ambient
temperature 5
～
40
℃
and a yearly average ambient temperature 25
℃
.
Shorten the maintenance interval if temperature exceeds the foregoing. If not, it can cause failure.
Maintenance interval is not a guarantee period.
Exceeding maintenance interval
Operation exceeding maintenance interval increases risk of failure and accidents.
When maintenance interval has elapsed, be sure to contact either the distributor who sold it to you or us.