8
3.1
PLATE DATA
The manufacturer’s identification plate is applied on the diaphragm pump (see picture below).
It must not be removed at all, even if the equipment is resold. For any communication with the
manufacturer always mention the serial number written on the plate itself.
• Equipment group : II
• Category: Gas 2G (Suitable for use in zones 1 and 2)
• Max. surface temperature: temperature class T6
• X marking : Any static electricity discharge from the pump is to be diverted to the ground through
the grounding wire which is included in this product.
3.2
DECLARATION OF CONFORMITY
3. PRODUCT INDENTIFICATION
