background image

22

14 Maintenance and Safety

CLEANING:

Do  not  wipe  dust  or  dirt  off  the  detector  reception  win-

dow  or  display  windows  with  a  dry  cloth  or  other  abrasive  material
as scratching could occur, reducing visibility through these windows.
A  soft cloth  and  mild  soap  and water  are  effective.  The unit  may  be
submerged  under  water  or  sprayed  with  a  low  pressure  hose  if
necessary.  Do  not  use  any  other  fluids  than  water  as  they  may
attack polymer components.

TRANSPORT:

Use  the  original  carton or  a  laser  instrument case to

transport the detector.

STORAGE:

If the detector will not be used for a month or more, it is

recommended to remove the batteries.

BATTERIES:

It  is  recommended  to  use  only  high  quality  alkaline  or

rechargeable batteries.

INTENDED  USES  OF  DETECTOR:

METOR  is  designed  and

suitable for detecting a rotating laser beam.

PROHIBITED USES:

 

Operation other than the intended uses

 

Opening the detector, except the battery compartment

 

Modification or conversion of the detector

 

Use of non-original METOR accessories

 

Operation without instruction

PRECAUTIONS:

The  person  in  charge  of  the  detector  must  have

read  and  understood  the  instructions  in  this  manual  and  ensure
other users do also.

Periodically  carry  out  test  measurements,  particularly  after  the  de-
tector  has been  subjected  to  abnormal  use  (e.g.  accidental  drops)
and before and after important measurements.

23

15 Disposal

Disposal  of  batteries  via  domestic  waste  is  prohibited!  The  user  is
liable  to  recycle  worn  batteries.  In  many  countries,  batteries  can  be
returned  free  of  charge  to  communal  collecting  points  or  battery
dealers.

Dispose of the detector which can no longer be used (irreparable) in
accordance with the valid legal regulations. This product shall not be
treated  as  household  waste.  Instead  it  shall  be  handled  over  to  the
applicable  collection  point  for  the  recycling  of  electrical  and  elec-
tronic  equipment.  By  ensuring  this  product  is  disposed  of  correctly,
you  will  help  prevent  potential  negative  consequences  for  the  envi-
ronment and  human health,  which could otherwise be caused by in-
appropriate  waste  handling  of  this  product.  The  recycling  of  mate-
rials will help to conserve the natural resources.

For more detailed information about recycling of this product, please
contact  your  local  Civic  Office or  your  household  waste  disposal
service.

WEEE registration number of manufacturer: DE37015608

Summary of Contents for METOR















Reviews: