20
12 Specifications
Working radius:
1 m
– 300 m (Laser dependent)
Sensor:
X²L-Sensor, Length 127 mm
Numeric Readout Height:
102 mm
Accuracy (Deadband):
In
ft
mm
cm
Ultra Fine
0.02
0.002
0.5
0.05
Super Fine
0.05
0.005
1.0
0.10
Fine
0.10
0.010
2.0
0.20
Medium
0.20
0.020
5.0
0.50
Coarse
0.50
0.050
10.0
1.00
Calibration Mode
0.01
0.001
0.1
0.01
Reception Angle:
± 45°
Detectable Spectrum:
610 nm ... 790 nm
Beeper-Volumes:
Loud 110 dBA
Medium 95 dBA
Low 65 dBA
LED Grade Indicators:
Green: On-grade,
Red: above / below
Power Supply:
2 x 1.5 V Batteries, Size AA
Battery Life:
Up to 60 hours
Automatic Shut Off:
Selectable: 30 min., 24 h, Off
Environmental:
Waterproof, Dustproof to IP67
Weight without clamp:
371 g
Dimensions without clamp:
168 x 76 x 36 mm
Operations Temp:
-20°C ... +60°C
Storage Temp:
-40°C ... +70°C
Conversion table
RPS
RPM
Laser Rotation:
6.7
400
5.0
300
3.3
200
2.7
160
2.3
140
*Specifications subject to change without notice.
21
13 Warranty
AndroTec METOR and clamp are warranted to be free of defects in
material and workmanship according to the statutory warranty regu-
lations.
The user of the product is expected to follow all operating, main-
tenance and care instructions. Any evidence of misuse, alteration, or
an attempt to repair products by unauthorized personnel, or use of
parts other than those provided by AndroTec GmbH automatically
voids the warranty.
In addition AndroTec GmbH grants an extended warranty for a pe-
riod of three years if within six weeks from the date of purchase the
warranty registration card is filled out and returned to AndroTec or
the product is registered via Internet at www.androtec.de+. Please
make sure that the registration is filled out properly and on file with
AndroTec GmbH.
This warranty period is thirty-six months from the date the new pro-
duct is delivered from the dealer to the purchaser or is put into ser-
vice by a dealer as a demonstration unit or rental unit. Competitor
purchased and tested units are excluded from this warranty.
AndroTec GmbH may choose to repair or replace, at its discretion,
any METOR, in the event of a failure for any reason, during the
warranty period. In case of a warranty claim, return the product and
a proof of purchase to the factory.
AndroTec's liability under this warranty is limited to repairing or re-
placing any product returned to its factory for that purpose. The fore-
going states the entire liability of AndroTec GmbH regarding the pur-
chase and use of its product and they shall not be held responsible
for any consequential loss or damage of any kind. This warranty is in
lieu of all other warranties, expressed or implied, and constitutes all
of AndroTec GmbH liability with respect to merchandise sold by it.
Warranty is strictly related to repair or substitution of defective parts
according to AndroTec's discretion. The warranty does not cover
any other damage that may occur directly or indirectly using
defective parts.
