10
6 - Timer:
This Symbol indicates an activated timer function. Refer
to page 12.
7 - Units of measure:
Indicates if centimeters (cm), millimeters
(mm), inches (in), or feet (ft) is selected.
8 / 9 - Numeric elevation / Menu text display:
When in
the normal operating mode, the four-character graphic
displays numeric elevation. Resolution and the decimal point will be
determined by the units of measure and the accuracy selected.
Refer to page 20 (Specifications) for details.
Dashed lines across the display indicate the numeric
vertical reception range has been exceeded.
The numeric display may also be turned off. Refer to page 15 for
details.
When in the MENU mode, the menu function text
abbreviations will be displayed. Refer to page 14 for
details.
10 - Accuracy indicator:
Indicates five levels of accuracy selec-
tions: ULTRA FINE, SUPER FINE, FINE, MEDIUM and COARSE.
Refer to page 20 (Specifications) for the specific values for each
accuracy selected. No center bar is displayed for calibration mode.
Refer to page 13. This mode is intended only for calibration of
rotational lasers and not for normal operation.