Maintenance
56
MAXXfl o EVO
6.2.2 FLUE TEMPERATURE SENSOR (B8)
This is located at the Flue outlet of the heat exchanger.
• Unplug the sensor from the loom (squeeze the catch to release).
• Remove sensor by unscrewing anti-clockwise
• Replacement is the reverse.
6.2.3 AVS37 GUI DISPLAY
This is located in the centre of the heater inside the front cover.
• Switch off electrical supply to heater
• Remove the 4 fi xing screws located at the rear of the screen.
•
Push off the wiring connector from the rear of the GUI
•
Replacement is the reverse.
Flue sensor
Connector
Securing screws