version 2.0 rev 18 Feb 2021
74
External Power Supply Requirements
Zyla 4.2 PLUS and Zyla 5.5
Low Voltage Supply Input
12 V +/- 5%
Low Voltage Supply Current
5 A
Low Voltage Supply Cable Connector
Tyco Electronics Part # 3-1437719-3
Low Voltage Supply Connector Pin Connections
Pins 1 & 2: 0 V
Pins 3 & 4: 12 V
Shield: 0 V
Low Voltage Supply Cable Connector
Solder-side View
(-)
(+12 V)
Ripple
200 mV peak-to-peak
In-rush Current Capability
Shall start up a load whose in-rush current from a 0.1 Ω source resistance is 1.7
A min. peak and a pulse width of 10 ms min. measured at half the peak
Safety
Certified to an appropriate IEC standard, e.g. IEC 62368-1 or IEC 60950-1, and
also meets the reinforced mains requirement of IEC 61010-1.
Environmental
Ensure that the EPS meets the environmental specification of the overall
product (see above)
Camera Power Specifications
Zyla 4.2 PLUS and Zyla 5.5
Mains Input for Supplied External Power Supply
100 – 240 VAC, 50 – 60 Hz
Power Consumption
External Power Supply:
30 W typical/ 56 W max
Camera Only:
25 W typical/ 50 W max
Voltage Rating
12 V
Current Rating
5 A
Overvoltage category
CAT II AC/DC, CAT I Camera
Summary of Contents for Zyla sCMOS 4.2 PLUS
Page 76: ...version 2 0 rev 18 Feb 2021 76...
