manualshive.com logo in svg

Andor Technology Zyla sCMOS 4.2 PLUS, Hardware Manual

Share
Download
Andor Technology Zyla sCMOS 4.2 PLUS Hardware Manual Download Page 59

version 2.0 rev 18 Feb 2021

59

3.5   Installing Software (Solis or SDK3) 

NOTE: You must have administrator access on your PC to perform this installation.

The same instructions cover the installation procedure for Andor’s Solis software or Andor’s SDK, which is used 
in conjunction with third party software. If you are planning to run your camera through a third party interface 
you will require the Andor Drivers, called SDK3.

Switch on the PC, insert CD and run the “setup.exe” file on the CD or download location.

•  Confirm the version of software.

•  Follow the on screen prompts.

•  Select the installation directory when prompted.

•  When prompted for camera type select Zyla.

•  On the final window click on “Install”. During the installation a number of other windows will appear as 

various drivers are installed.

•  Click on the finish button when prompted.

Figure 36: Selecting the Camera Type

For more information visit: 

https://andor.oxinst.com/support/

Summary of Contents for Zyla sCMOS 4.2 PLUS















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands