version 2.0 rev 18 Feb 2021
33
2.6.2.4 Rolling Shutter Internal Triggering (Overlap Mode)
Internal Triggering in Overlap Mode allows the user to perform an exposure and acquire images from the
sensor simultaneously. This is achieved by starting a new exposure for a new frame while the current frame’s
exposure is being read out from the sensor. The cycle time is the same as the exposure time entered by the
user in this scenario.
Short Exposures
When the required exposure time is less than the time it takes to read out a frame (Short Exposures), the cycle
time is always defined by the time taken to read out a frame.
Figure 17: Rolling Shutter Internal Triggering (Short Exposures)
Table 13:
Rolling Shutter Internal Triggering (Overlap Mode- Short Exposures) Timing Parameters
Parameter
Minimum
Maximum
Exposure
1 Row
1 Frame - 1 Row
Cycle Time (1/Frame Rate)
1 Frame
1 Frame + Ex 1 Row
FIRE any low period
1 Row
-
Summary of Contents for Zyla sCMOS 4.2 PLUS
Page 76: ...version 2 0 rev 18 Feb 2021 76...
