DN:KD-5985-SMSY01 V3.0 Operation Guide
Template version:1
7/22
When LCD shows battery symbol
, replace all batteries with new ones.
Rechargeable batteries are not suitable for this monitor.
Remove the batteries if the monitor will not be used for a month or more to avoid
relevant damage of battery leakage
Avoid the battery fluid to get in your eyes. If it should get in your eyes, immediately
rinse with plenty of clean water and contact a physician.
d. If you use the AC adapter, please make sure the
monitor turn off or no batteries. Then put the connector
plug of the adapter into the socket, at last connect the
other plug of the adapter to AC. The monitor can work
normally when use the AC adapter.
When disconnect the AC Adapter:
Remove the AC Adapter from the electrical outlet;
Remove the AC Adapter plug from the monitor socket.
Do not plug or unplug the power cord into the electrical outlet with wet hands.
Do not overload power outlets. Plug the device into the appropriate voltage outlet.
If the AC adapter is abnormal, please change the adapter.
Do not pull out the adapter when you are using the monitor.
Other adapters not approved for use with the monitor may damage it.
The monitor, the batteries and the cuff, must be disposed of according to local
regulations at the end of their usage.
2. SETTING
a. Once you install the battery or turn off the monitor, it will enter Clock Mode, and LCD
will display time and date.
b. While the monitor is in Clock Mode, press the
―SET‖ button, the data and time, VOICE
symbol, RCC symbol and ALARM symbol will
display, then the ALARM symbol will blink at
first.
Press the button ―A+‖ repeatedly, the
VOICE symbol, the data and time, the RCC symbol will blink in turn. Also you can
press the
button ―B-‖ repeatedly, but the order is opposite. The different symbol stand
for different setting option. When the accordingly
symbol blink, press the
―SET‖ button
can be into the accordingly setting adjust status.
2.1 ALARM SETTING
a. When the ALARM symbol is blinking, press the
―SET‖ button the alarm option will
display on the LCD. Then the alarm enable or disable option is blinking, press the
button ―A+‖ or ―B-‖ enable alarm with alarm sound or enable alarm with radio sound
or disable the alarm. Press
the button ―SET‖ repeatedly, the hour and the minute will
blink in turn,
While the number is blinking, press the button ―A+‖ to increase the
number or
press the button ―B-‖ to reduce the number. Keep on pressing the button "
