background image

  DN:KD-5985-SMSY01 V3.0                                                            Operation Guide

 

 

  

 

 

 

 

Template version:1 

13/22                                                   

 

 

The radio support worldwide frequency band is 87 -108 MHz. 

b.  Pressure 

―A+‖ button, the monitor will seek up for another broadcasting station base 

on the frequency of current broadcasting station. Pressure 

―B-+‖ button, the monitor 

will seek down for another broadcasting station. 

c.  The  monitor  will  turn  off  automatically  after  5  minutes  of  no  operation,  the  LCD 

backlight  will  turn  off  if  you  use  batteries,  when  you  use  the  AC  adapter,  the  LCD 

backlight will automatically adjust Light intensity according to its environment. 

d. 

Press the button    ―START‖, the monitor will be turned off. 

 

11. OTHERS 

 

a.  While  the  monitor  is  in  Clock  Mode,  the  monitor  can  also  show  the  environmental 

temperature  and    humidity  automatically  every  other  about  five  second.  And  the 

temperature will display with Celsius or Fahrenheit by turns.     

The monitor can’t be used as a thermometer or a hygrometer. 

b.  The  LCD  backlight  will  automatically  adjust  Light  intensity  according  to  its 

environment when the monitor turn on. When use the AC adapter., the LCD backlight 

will  automatically  adjust  Light  intensity  according  to  its  environment  in  the  Clock 

Mode. 

c.  If  the  voice  function  is  on  and  you  press  the  button  in  Clock  Mode,  the  monitor  will 

speak the current time. 

 

12. ASSESSING HIGH BLOOD PRESSURE FOR ADULTS 

 

The following guideline for assessing high blood pressure (without regard to age or gender) 

has  been  established  by  the  World  Health  Organization  (WHO).  Please  note  that  other 

factors (e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration. Consult 

with  your  physician  for  accurate  assessment,  and  never  change  your  treatment  by 

yourself. 

Summary of Contents for KD-5985























Reviews: