5
Note:
Please check test strip indication for use, which indicates test strip’s use life, storage
condition and operational step.
Setting Up the Date, Time and Unit of Measure
1. Start with the Meter off. Long press the S button. The Meter is now in the
setting mode.
2. The last two digits of year will flicker (for example:
“y09” equals 2009).
Short press and release the MEM button until the correct year appears.
3. With the correct year on the display, short press the S button and the month
setting appear. Short press and release the MEM button until the correct
month appears.
4. With the correct month on the display, short press and release the S button
to bring up the date setting. Short press and release the MEM button until
the correct date appears.
5.
With the correct date on the display, short press and release the S button to
bring up the time setting. The hour setting will be the first. Short press and
release the MEM button until the correct hour appears.
6.
With the correct hour on the display, short press and release the S button
and the minute display will appear. Short press and release the MEM
button until the correct minute appears.
7. When the correct minute is on the display, short press and release the
MEM button to bring up the Unit of measure display. Short press and
release the MEM button until the unit (mg/dL or mmol/L) that you prefer
appears. Your meter was set to the unit generally used in your country in
our factory.
8. After set the correct unit, short press and release the S button and the unit
