5
USER MAINTENANCE
This appliance does not require special maintenance, cleaning or
lubrication. Service only through Andis authorized service stations. To find
an Andis authorized service station near you log on to
www.andis.com
or
contact our customer service department: 1-800-558-9441 (U.S.) or
1-800-335-4093 (Canada).
Untwist cord before use. After use, re-wrap cord and store unit in a safe
place. Do not wrap cord tightly around appliance. Do not hang the unit by
the power cord.
TO CLEAN AIR INTAKE VENTS AND GRILL
For proper operating performance, the air openings must be kept clean of
excess hair and lint. Blocked or clogged air vents or grill may cause the
dryer to overheat. The dryer has a removable air intake grill and foam filter
(Figure B). These parts may be easily removed to clean excess hair and lint
that can clog up a hair dryer. The grill and foam filter are two separate
pieces; be sure not to lose filter when cleaning.
To clean, unplug the cord and allow dryer to cool. To remove the grill, turn
it counter-clockwise until it stops, then remove from dryer. To clean grill and
filter, take a small brush and mild cleaning solution and lightly brush away
excess lint and hair. Rinse and dry both pieces, making sure that they are
completely dry before putting them back on the dryer. Put the foam filter
back in place. Place grill back on dryer and turn it clockwise until it stops.
TO CLEAN EXTERIOR SURFACE OF DRYER
When cleaning is needed, unplug the cord and allow to cool. Clean with a
sponge or soft rag moistened with a mild soap and water solution. Do not
use harsh cleaners, detergents, or solvents. Dry thoroughly before use.
