Instruction Manual
–
V6.19
GYROTORK DUAL version
- 13 -
8.
Sensor Units V1
Sensor units are independently selected. Touch the arrow key in the desired display window to
display all available units. The units allowed will change with the sensor attached. Torque or travel
units.
The green key above the unit selection determines the sign of the displayed value, either: +, - or no
sign can be selected.
9.
Set points - Limits
Allows you to access to the limits
setting screen, see the chapter “Limits”
V.
SET POINTS Setting - Limits
To access the limits settings touch the bar graph
on the main screen or touch the button “limits”
from the “Display” screen. The
limits feature allows you to setup action under the condition of the
current values. Those actions can be: enable an output or the buzzer.
1.
Activate/Deactivate
Touch the area “Touch to activate” or “Touch to deactivate” to activate or d
isable the set points
menu.
2.
Torque transducer tab
A separate tab is displayed for each sensor. Select the desired sensor tab and set your limit value.
Your gauge can beep and activate a TTL output once the sets point has been reached.