Instruction Manual
–
V6.19
GYROTORK DUAL version
- 12 -
1.
Main screen
The main display area can show all of the values that appear in the list. Touch this value to display
the list of available values. Select the sensor you want to display by touching the green window
(channel 1: internal or channel 2: external).
•
The available data are: raw data, Peak (maximum), minimum, calculation1 and
calculation2 (
see chapter “Setting calculation”)
2.
Auxiliary
The Auxiliary display window has the same parameters as the Main screen, so it allows you to display
a second selection.
3.
Curve
You have 3 choices:
•
Displays the curve and two values: select “curve” (as in the figure above)
•
Shows
two values but no curve: select “None”
•
Shows three values but no curve: select the third value to be displayed
When the curve is not displayed, the bar graph option always represents time.
4.
Bar Graph
Select the sensor and type of data displayed in the bar graph. Same parameters as the main screen.
5.
State
Show or hide the output status display.
6.
Digits
Number of digits right of the decimal point for all displayed data are selected from the drop down
menu after touching the arrow key.
7.
Time unit
Select the time units between: minute, seconds or milliseconds.
9
4
6
8
7
1
2
3