ANDILOG CENTOR TOUCH DUAL, Operating Manual, Page: 35 / 37

Instructions Manual – V6.10
CENTOR TOUCH Force Gauge – STAR / DUAL version
- 34 -
3. Connections
Connector detail SubDHD 26 pins connected to CENTOR TOUCH electronic card
PIN
1 GND
2 I1 input
3 Not used
4 RS232 read data
5 USB device data minus
6 USB host data minus
7 O3 output.
Open collector requires 50 k ohm pull up to 5 volts DC
8 O2 output
Open collector requires 50 k ohm pull up to 5 volts DC
9 Gauge reset
10 Analogue output
11 I2 input
12 Not used
13 Not used
14 USB device power
15 USB host power
16 O4 output
Open collector requires 50 k ohm pull up to 5 volts DC.
17 O5 output
Open collector requires 50 k ohm pull up to 5 volts DC.
18 GND
19 Chassis ground
20 Pedal input
21 Not used
22 RS232 transmit data
23 USB device data plus
24 USB host data plus
25 O6 output.
Open collector requires 50 k ohm pull up to 5 volts DC.
26 O1 output,
Open collector requires 50 k ohm pull up to 5 volts DC.