ANDILOG CENTOR TOUCH DUAL, Operating Manual, Page: 29 / 37

Instructions Manual – V6.10
CENTOR TOUCH Force Gauge – STAR / DUAL version
- 28 -
of the test or until the condition is true (limits case)

Pulse: the output changes state for a period of time of 50ms, and then come
back to its previous state.
2. Inputs and Pedal
The 3 input (Pedal, E1 and E2) of the Centor Touch can be set separately. Those Inputs allow you to
do the following actions:

Active Test: start the test

End Test: Stop the test

Tare Vx: tare the channel Vx

F Contact: uses during the calculation
For each input, it is possible to define its default value (at the beginning of the test): high or low:
Low Level Hhigh Level
The Centor Touch can be connected to an external pedal switch, set the pedal action in this dialog
box.
XI. GENERAL Setups
Access to the General Setting through the icon:
1
2
3
4
5