ANDILOG CENTOR TOUCH DUAL, Operating Manual, Page: 25 / 37

Instructions Manual – V6.10
CENTOR TOUCH Force Gauge – STAR / DUAL version
- 24 -
5. DATASTICK – USB Memory Stick (optional)
a. Presentation
The DATASTICK kit is an option available with the
CENTOR TOUCH, in order to save your data on a USB
memory stick.
The kit includes: a USB Stick and a connexion cable (to
link the CETOR TOUCH through the 26 pins connector
to the USB stick).
This feature is available for all CENTOR TOUCH from
version V4.6
b. Configuration
You can activate and configure the Datastick communication setting from the Menu
“communication”
1. The CENTOR TOUCH is able to save several types of data
on the USB stick, to choose from:

Calculated values: max, min, and calculations
selected in the menu “TEST”

Raw data: the value measured by the sensor at the
time of communication.

Curve: save the curve plotted on the screen

Curve and calculations: the plotted curve + max,
min, and calculations selected in the menu “TEST”

Statistics: data saved in the statics table of the
CENTOR TOUCH
2. You can change the default file name for the unitary data (statistics and values). Default file name:
“ANDILOG_date” (i.e.: ANDILOG_2013_01_17.txt”). Push the button to change the name.
Data will be recorded at the end of this file.
The directory where the curve is saved is by default names “DATASTICK_date_hours”. You can
change this default name by pushing the button.
The directory includes 2 files:

Data.txt: curve data

testSettings.txt: setting of the curve
2
3
4
5
1