3
Introduction
Welcome
In many applications, weighing systems for content mea-
surement offer a more practical and precise solution than
other techniques. With a field-proven sensor program of
the brand Kistler-Morse, Anderson-Negele now also offers
precise, robust and efficient solutions in this measuring
category.
This manual describes the installation of the sensors and its
various hardware options. It includes procedures for adjust-
ing the vessel, and instructions for wiring the sensors to one
or several junction boxes and to the signal processor.
Refer to the signal processor manual for specific information
on wiring the junction boxes to the signal processor.
If you have any questions about the product, its installation or
commissioning please contact Anderson-Negele Support at:
America:
Phone 800-833-0081
[email protected]
Other countries:
Phone +49-8333-9204720
Authorized Personnel
All instructions described in this document must be per-
formed by authorised and qualified service personnel only.
Before installation, please read these instructions and
familiarise yourself with the requirements and functions.
The required personal protective equipment must always be
worn when servicing the device.
Use
The device is solely intended for use as described in this
manual. Reliable operation is ensured only if the instrument
is used according to the specifications described in this
document. For safety and warranty reasons, use of accessory
equipment not recommended by the manufacturer or modi-
fication of this device is explicitly forbidden. All servicing
of this equipment must be performed by qualified service
personnel only. This device should be mounted in locations
where it will not be subject to tampering by unauthorized
personnel.
Misuse
Improper use or installation of this device may cause
the following:
· Personal injury or harm
·
Application specific hazards such as vessel overfill
· Damage to the device or system
·
Inspection and storage
Inspect each package upon receipt for damage that may
have occurred due to mishandling during shipping. If the
unit is received damaged, notify the carrier or the factory for
instructions. Failure to do so may void your warranty.
If the device is not scheduled for immediate installation:
1. Following inspection, repackage the unit into its original
packaging.
2. Select a clean dry site, free of vibration, shock and
impact hazards.
3. If storage will be extended longer than 30 days, the unit
must be stored at temperatures between 0 to 40 °C
(32 to 104 ºF) in non-condensing atmosphere with
humidity less than 85 %.
Caution
Possible risk to the product. The sensor or other equip-
ment may be damaged if this information is ignored.
Note
Contains additional information about a step or feature
critical to the installation or operation of the sensors.
Manual Conventions
Two kinds of special explanations appear throughout the
manual: Caution and Note.
Caution
Do not store a non-powered unit outdoors for a
prolonged period.
Summary of Contents for Load Stand II
Page 23: ...23 Notes ...
Page 24: ...2 4 Notes ...
