General Information
Your Andersen
®
hardware has been manufactured of high quality, fine
metal. Fine metal requires periodic attention to maintain its beauty and
characteristics. Climate, location, and exposure to corrosive environments
such as industrial areas, pesticides, herbicides, or salts are challenges to
your ability to maintain the hardware’s beauty and characteristics.
Wash hardware using a mild detergent and a soft cloth to remove mild stains, loose dirt, and soil. Avoid abrasive cleaners, cloths,
or brushes. When mild detergent and a soft cloth are not adequate, a diluted, household vinegar solution (5%) and a soft bristled,
non-abrasive brush may be used. Avoid contact with painted components and nearby surfaces. After cleaning, wipe down with a
damp cloth and wipe dry to prevent spots.
Satin Stainless Steel
Care and Maintenance
Do not use or apply harsh chemicals, abrasives
and/or cleaners. Product damage could occur.
Do not refurbish hardware. Contact a professional
hardware restorer for refurbishing.
7
9173980
▶
Procedure is complete.
Remove existing latch receiver screws from latch receiver and dispose of properly. Position latch strike plate over latch receiver and fasten with
color matched latch receiver screws (provided).
7
NOTICE
Frenchwood
®
Patio Door latch strike plates differ for active doors versus active-passive/
passive-active two panel doors. Follow procedure for your type of door.
▶
For passive hardware application for AP/PA doors: follow steps 3 - 7.
CAUTION
A-Series Frenchwood® Hinged Inswing and 400 Series Frenchwood Hinged Inswing Patio Doors Only
AP/PA Unit
(Passive Panel)
Active Unit
(Jamb)
Color Matched
Latch Receiver
Screws (provided)
Color Matched
Latch Receiver
Screws (provided)
Latch
Receiver
Latch
Strike
Plate
Latch
Receiver
Screws
Latch
Receiver
Screws
Latch
Receiver
Latch
Strike
Plate
