4
9173980
Fill bottom screw hole with sealant as shown. Position escutcheon base plates over spindle on both sides. Fasten using escutcheon base plate
screws and sleeve nuts as shown. (DO NOT fully tighten screws until escutcheon base plates are straight up and down.)
3
Escutcheon base plate screws
must be installed from interior and
sleeve nuts from exterior to prevent
tampering with the handle set from
the exterior.
CAUTION
Escutcheon Base
Plate Sleeve Nuts
(exterior side)
(side view)
Escutcheon Base
Plate Screws
(interior side)
NOTICE
For optional exterior keyed lock
hardware, make sure exterior keyed
lock gasket is positioned securely to
the exterior escutcheon base plate
before applying to panel, as shown.
Exterior
Keyed Lock
Gasket
(for optional
exterior keyed
lock)
DO NOT overfill hole
with sealant or allow
sealant to seep out
the other side.
