5
9173980
Position interior and exterior escutcheon plates over the escutcheon base plates as shown. Apply firm pressure to top and bottom ends until
attachment clips engage.
4
Partially insert set screw into hole on bottom of handles. Slide handles onto spindle, tight to escutcheon plate. Tighten set screws on both handles
using 3 mm hex key.
5
Attachment
Clip
Attachment
Clip
Apply firm pressure to top and
bottom ends of both escutcheon
plates to engage attachment clips.
Handles must point toward the glass
with set screw on the bottom.
Partially insert
set screw before
applying handle
to panel.
