AND HT-3000CL, Instruction Manual

Page: 13 / 20

13
Function List
Items list Descriptions
Automatic
power off If the scale is left on and the STABLE indicator is lit, the automatic
power off function turns power off after approximately 5 minutes.
“ poff ” 0 Disables automatic power off function.
◆
1
Enables automatic power off function.
Weighing unit
selection
“
Unit
”
Selects weighing units to be used
.
Filter conditions Weighing stabilization levels/Response speed selections
“
Cond
” 0 Fast response/Susceptible to vibration and drafts
◆
1
Medium response and effect level against
environment
2 Slow response/Strong resistance to vibration and drafts
Zero tracking This function automatically track small zero drift caused by
changes in the ambient environment.
“ trc ” 0 Disables zero trucking function.
◆
1
Enables zero trucking function.
Key lock Misoperation prevention function
“
lock
”
◆
0
Disables key lock (Upper and lower limit value
settings and unit switching are available)
1 Enables key lock (Upper and lower limit value
settings and unit switching are unavailable)
Comparison
conditions Operating conditions of the comparator
“ Cp ” 0 Does not compare (Comparator disabled)
◆ 1
Compares all data.
2 Compares all stable data.
3 Compares plus data, excluding near zero.
4 Compares stable plus data, excluding near zero.
5 Compares all data, excluding near zero.
6 Compares all stable data, excluding near zero.
Memory number
selections Selects a memory number for comparison to be used when
turning the power on.
“
Cpn
” 0 Does not compare (Comparator disabled).
◆
1
Compares using the first memory.
2 Compares using the second memory.
9 Compares using the ninth memory.
◆
Factory settings

“
Near zero” means a range within
±
4 digits from zero point in grams.