AND HT-3000CL, Instruction Manual

Page: 5 / 20

5
PREPARATION
Installing or Replacing Batteries
Remove the battery cover and insert four new
batteries into the battery compartment, taking care
of the polarities.
CAUTION

Insert four batteries into the
battery compartment, taking
extreme care to that the polarities
plus and minus are observed
.

Replace all of the batteries at one time.

Do not mix batteries made by different
manufactures, or mix old and new
batteries.

Turning the scale over to replace the batteries may result in excessive
force being applied to the load cell and could damage the scale.
Take care not to apply too much force to the weighing pan.

Be sure to lock the battery cover again after installing the batteries.

The battery life differs depending on the ambient temperature.

Remove all of the batteries from the battery compartment when the
device will not be used for a long period of time or is only operated using
the AC adapter.
Connecting the AC Adapter
CAUTION

Verify that the correct AC adapter is
used.
Open the rubber cap and plug the AC
adapter into the AC adapter jack.
Rubber cap
AC adapter
AC adapter
input jack
Battery cover
“AA” size batteries