— 15 —
Installation
STEP 15
Install Filters
To install filters for the following three steps (See Figure # 8):
• Angle the filter into slots at the left side of the hood.
• Push the button on handle of the filter.
• Release the handle once the filter fits into a resting position.
Cleaning Filters
IMPORTANT: Drain oil from baffles, spacers, filters, oil tunnels, oil containers before oil and residue overflow!
• Remove all baffles, spacers, filters, grease tray, and oil containers and discard oil and residue.
• Wash with warm soapy water. NOTE: Stainless steel baffles, spacers and oil tunnel are top rack dishwasher safe.
• Dry thoroughly before replacing and follow directions for installation in reverse.
• Filters should be cleaned after every 30 hours of use.
• Should filters wear out due to age and prolonged use, replace with a new filter.
Fig #8
Summary of Contents for GCL630
Page 22: ... 22 Notes ...
