TX7+
现场准备手册
TX7+ Site Preparation Manual
15
If you select a system other than ANCA Standard System, please
consult your ANCA Branch representative. The integration of non-
standard ANCA system has to be arranged by the customer. ANCA will
not be responsible for the equipment supplied by other manufacturers.
请参考电力图
952-0-00-9300
表
170, 952-0-00-8100
表
15
和表
40
。
Please refer to electrical drawings 952-0-00-9300 SHT170, 952-0-00-
8100 SHT15 & SHT40.
备选
ANCA
供应系统
Optional ANCA supplied systems
二氧化碳
(CO2)
灭火系统是一种利用固定喷嘴媒介配电网的工程系统。系统能够通
过转移支持燃烧的含氧空气以应对
A,B,C
险级的火灾。
The Carbon Dioxide (CO2) Fire Suppression System is an engineered
system utilizing a fixed nozzle agent distribution network. The system
will extinguish fires in Class A, B and C hazards by displacing the air
containing oxygen, which supports combustion.
系统可以通过自动系统操作的侦察和控制设备启动,并且在需要的状况下可以进行
本地和远程的人工操作。
The system can be triggered by detection and control equipment for
automatic system operation as well as provides local and remote
manual operation if needed.
适用标准:
Applicable standards:
•
UL
清单所列
EX-2968
UL listed EX-2968;
•
USCG
批准,批准号为
162.038/7/0
USCG approved under Approval No. 162.038/7/0;
•
达到
pf NFPA
标准
12
的要求“二氧化碳灭火系统”
Meets requirements pf NFPA Standard 12 “Carbon Dioxide
Extinguishing Systems”;
•
由工厂共同研究公司批准
Approved by Factory Mutual Research Corp.
•
AUTOPULSE
控制系统达到
NFPA 70
和
NFPA 72
的要求
AUTOPULSE Control System meets requirements of NFPA 70 and
NFPA 72.
热探测器自动探测到火苗后,二氧化碳灭火系统随即自动启动。热探测器是通过一
灵活的钢管连接到火灾探测控制面板上的。
The Carbon Dioxide system shall be automatically operated upon
detection of a fire by the thermal detector. The thermal detector is
connected to the Fire Detection Control Panel via a flexible steel
conduit.
系统也可通过一位于操作门附近的由人工控制杆控制的启动器进行人工操作。
Manual operation of the system is possible via a manual lever operated
actuator, which is located near the operator door.