Anatomic SITT Zitzi Sharky Pro User Manual Download Page 50 | Manualshive

Page: 50 / 56

background image

50

User manual Zitzi Sharky Pro

www.anatomicsitt.com | +46 11 16 18 00

Warranty

1 year against manufacturing defects� For more detailed information about the
warranty we provide, see page 47 of this manual�

Combinations

Zitzi Sharky Pro and its accessories are CE marked products that can be
combined with all the accessories described in this manual� Zitzi Sharky Pro is
suitable for use together with frames like Zitzi Flipper Pro Flex, Zitzi Seabass Pro,
Guppy and Snapper� For other combinations please contact Anatomic SITT AB�

Spare parts

For the CE marking of the Zitzi Sharky Pro to be valid, the seating system may only
be fitted with spare parts delivered by Anatomic SITT AB�

Reconditioning

Reconditioning of the seating system may only be made with original parts from
Anatomic SITT AB�

Marking

Zitzi Sharky Pro and its accessories are CE marked products� A unique serial num-
ber is located on a label placed under the activation housing� This serial number
should be quoted in any correspondence regarding the product�

Recycling

A used part or product should be dismantled and discarded� The parts should
be separated by material type, metal, plastic and combustibles (textiles)�
Gas piston is sorted as hazardous material�

Note!

Always check that the device is not customized when

reconditioning, before it is sent to new users�

«
...
48
49
50
51
52
...
»

Summary of Contents for Zitzi Sharky Pro

























































Reviews:

No comments

Related manuals for Zitzi Sharky Pro

Brand: Columbia Medical Pages: 2

Brand: Drive Pages: 36

Brand: Quantum Pages: 2

Brand: NRS Pages: 2

200 kg Shower stool

Brand: HMN Pages: 12

BUGGY CORZO Xcountry

Brand: Patron Pages: 4

Brand: Neatech Pages: 76

Brand: panthera Pages: 3

Brand: Days Pages: 2

Brand: broda Pages: 2

Brand: Mo-vis Pages: 14

Brand: WheelAir Pages: 28

Cushion Cover V2

Brand: WheelAir Pages: 28

Brand: WheelAir Pages: 28

Brand: Vitea Care Pages: 21

Brand: Vitea Care Pages: 20

Recliner Plus VCWK7T

Brand: Vitea Care Pages: 22

Brand: Pegasus Zorg Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands