Anatomic SITT Zitzi Sharky Pro, User Manual

Page: 32 / 56

32 User manual Zitzi Sharky Pro www.anatomicsitt.com | +46 11 16 18 00
Mounting the table
Put the table on the armrest plates and then rotate the locking lever of the
tableinto position below the armrest plate� The locking lever must be rotated
until it is inside the rim of the raised armrest plate�
Changing the mounting holes
There are 3 mounting widths to choose from� To change the width, use one of the
optional mounting holes located under the padding� The locking lever is mounted in
the center hole as default�
To change the mounting hole, you must first lift the back end of the padding�
The hole markings on the rear edge shows the size of the table�
Table, fixed
Locking lever
Attachment widths
Choose between three
mounting holes
Note! Do not lift the front of the table�