Anatomic SITT Zitzi Sharky Pro, User Manual

Page: 34 / 56

34 User manual Zitzi Sharky Pro www.anatomicsitt.com | +46 11 16 18 00
Mounting of the reinforced table
To mount the reinforced table, put the table mounting tube (A) through the tube
(B) located under armrest plate�
Then push the table to desired position and let it rest on the armrest plates�
Tighten the finger knob (C) to lock the table� The locking lever must be rotated until
it is inside the rim of the raised armrest plate�
Adjusting the width
Instead of adjusting the width of the armrests, you can adjust the width of the table
so that the mounting brackets will fit the mounting tubes in the armrest brackets�
To adjust the width, loosen the screws (D) and adjust to the desired position�
Then tighten the screws (D)�
Table, reinforced mounting brackets
Note!
If the width adjustment of the table is not enough, it’s possible
to adjust the armrest width� See page 20-21 in this manual for further
information�