Anatomic SITT Zitzi Sharky Pro, User Manual

Page: 30 / 56

30 User manual Zitzi Sharky Pro www.anatomicsitt.com | +46 11 16 18 00
Adjusting the height
To adjust the height of the upper arm support, loosen the finger knobs (A)
and then adjust to the desired height� Tighten the finger knobs (A) when you have
reached the desired position�
Adjusting the width
To adjust the width of the upper arm support, loosen the screws (F), then adjust to
the desired width� Tighten the screws when you have reached the desired position�
Cushion cover
When the cushion cover needs to be washed you can easily remove it from the
upper arm support plate by stretching the elastic ribbon on the back of the cover��
To reposition the cushion cover, stretch the cover over the arm support plate and
make sure it is centered�
Upper arm support
Mounting the upper arm support
Mount the upper arm support with the finger knobs (A), washers (B), spacers (D)
and carriage bolts (E)� Note that the carriage bolts in the lateral support must be
replaced by the supplied, longer carriage bolts� For more detailed information
on how to mount lateral support, see page 6 of this manual�
Put the carriage bolts (E) through the lateral support and the slot in the
back plate� Then meet up with spacers (D), the upper arm support bracket (C),
washers (B) and a finger knobs (A) on the opposite side of the backrest�
Note! The carriage bolts the in the lateral support must be replaced
by the supplied, longer carriage bolts when mounting the upper arm
supports�
Note! When adjusting the upper arm support, the lateral support is
also available to adjust at the same time�