Maintenance and repair
29
6
Maintenance and repair
The maintenance and repair work that may be carried out by the customer is restricted
to the work described in this manual.
WARNING
Risk of electric shock! Do not touch!
Prior to commencing any maintenance or cleaning work, switch off the device and un-
plug the power plug.
We recommend regularly performing the following maintenance and repair work at the
specified intervals, taking the following information into account:
Maintenance and repair work
Monthly
Every six months
Check the drawer of the qTOWER³ auto
(see page 30)
X
Check electrical components and cables,
test the grounding conductor (qualified
electricians only!)
X
All maintenance and repair work beyond this scope may only be performed by Analytik
Jena Service personnel or authorized and trained persons. Any unauthorized interven-
tion limits warranty entitlements. If the device exhibits any faults or defects, please con-
tact the Analytik Jena Customer Service immediately.
Contamination and natural wear of assemblies lead to higher stress on the device
and thus to a higher probability of device failure.
All motor- or manually operated parts in the qTOWER³ auto are subject to natural
wear. Pay attention to signs of wear on mechanically stressed assemblies and have
them replaced if necessary.
