analogue.co
18 / 23
V1.1 March 2019
System Settings
Debug Options Cont.
Display Enable – Will show a blue screen or blue
area of the screen whenever the display is inactive.
The Display can be enabled on any scanline.
Disabling the display gives the programmer more
resources to accomplish other tasks.
Highlight Scanline – Shows a green horizontal line
on the line on the accompanying slider.
Highlight Pixel – Shows a green vertical line on the
pixel column selected on the accompanying slider.
LED Options
These options control the colors displayed by Mega
Sg’s RGB LED.
Standby Color – LED Color is solid White.
Center Pixel – LED Color will be whatever the pixel
in the center of the screen’s color is. If you choose
this option, you may not see the LED show color
when the system turns on if you boot to the menu
because the center pixel is black.
K-Pro Rainbow – LED Color cycles through the
rainbow.
Load Custom Pattern – Allows you to load a custom
pattern contained on the SD card. Will send you to
a File Browser. Pattern files are 768 bytes in size.
Here
is a link to a few custom patterns.
Adjust Pattern – These options allow you to adjust
the animation speed and position of the pattern
selected in the previous menu.
Animate Pattern – Will disable animation and leave
the LED set to the last displayed color if disabled.
Equivalent to setting the Animate Speed to 0.
Animate Speed – Determines the speed at which
the LED changes colors, higher numbers give faster
transitions.
Pattern Position – Determines the currently
displayed color within the pattern. Each pattern
consists of 256 RGB values.
LED Brightness – Determines the brightness of
the LED in a slider, 0 turns the LED off.
Save/Clear Settings
Save Settings – Saves menu settings to Mega Sg’s
internal flash memory.
Restore Factory Defaults – Restores Factory
Defaults, so take notes of your settings prior
to updating.
Tools
Cheat Codes
Enable Checked Codes – Activates and Deactivates
Codes individually. Up to six standard Game Genie
codes can be entered, Codes #1-#6. A code
is entered by moving the D-pad to the box and
pressing A to advance the numbers and letters.
You can only go forward from A-Z & 0-9, not
backward. Genesis/Mega Drive Game Genie
codes do not use the letters I, O, Q or U.
Controller Settings
Runs a small program that lets you test the
controller directionals and buttons.
