Dr Strangelove User Manual 11-2017
Note, the 3.5mm MOD In socket is not switched. So if you plug a lead in here, but not the 1/4” input
socket, you will still also get the internal LFO being sent to the Ring Mod.
If you want to disconnect the internal LFO, but want to use just the 3.5mm Mod In jack, then just
put a 1/4” jack adaptor (like a head phone adaptor), or unconnected jack lead into the rear panel
Mod In socket.
LFO
FALLOUT
This alters the speed of the analogue LFO modulator.
CHANGE
This sets the modulation depth (‘loudness’) of the modulating signal fed into the RM modulation
input.
Q BOOST
This switch turns on Q Boost, which allows resonance self-oscillation.
HARD / SOFT -SQUARE / TRIANGLE
This switch allows you to select between square and triangle wave modulation signals.
Triangle will give you softer modulation, Square wave gives you sudden, harder changes.
Echo
The echo used is a lo-fi digital echo giving an ‘analogue’ bucket brigade style sound.
HALF LIFE
This sets delay time.
RATE
This sets repeat rate.
MIX
This sets the mix level between fully dry, to a 50/50 balance mix between dry and wet.
Additional CV sockets
Use the minijack sockets to expand connection to other synthBlocks, modular, and eurorack!
LFO CV OUTPUT
There are square wave and triangle wave output sockets.
Patch these to other synthBlocks or modular synths.
