Analog way OTR401, User Manual

Page: 25 / 33

OCTO-QUATTRO™ Chapter 8 : REMOTE CONTROL PROGRAMMER'S GUIDE (continued)
PAGE 25
8-4. COMMANDS AND RESPONSES TABLE (continued)
VALUE
ASCII
COMMAND
RESPONSE
COMMAND
DESCRIPTION
TYPE
MIN MAX DESCRIPTION
IMAGE COMMANDS
H HP Horizontal position. Rd/Wr 0 255
V VP Vertical position. Rd/Wr 0 255
W HW Horizontal size. Rd/Wr 0 255
S VS Vertical size. Rd/Wr 0 255
yC ACAD Automatic centering. Rd/Wr 0 1 1 = CENTERING action (automatic reset).
QA ASP Input aspect ratio selection. Rd/Wr 0 2
0 = 4/3 standard 1 = 16/9 letterbox
2 = WS anamorphic.
QH QH Horizontal smoothing. Rd/Wr 0 1
0 = OFF 1 = ON
B BRG Brightness adjustment (video). Rd/Wr 0 255
D CON Contrast adjustment (video). Rd/Wr 0 255
O COL Color adjustment (video). Rd/Wr 0 255
T HUE Hue adjustment (video NTSC). Rd/Wr 0 255
QO OVR Underscan / overscan (video). Rd/Wr 0 1
0 = underscan 1 = overscan
QP PROC Sharpness adjustment (video). Rd/Wr 0 7
0 = standard level 1 = level 1
2 = level 2.................. 7 = level 7.
K BLK Black level adjustment (computer). Rd/Wr 0 255
QR RLV Red level adjustment (computer). Rd/Wr 0 127
QG GLV Green level adjustment (computer). Rd/Wr 0 127
QB BLV Bleu level adjustment (computer). Rd/Wr 0 127
mc CLK Number of pixels per line (computer). Rd 0 65535
mC DLCK
Pixels clock adjustment (computer).
This function is active if CLK
≠ 0.
Rd/Wr 0 127
QF QF
Optimize adjustment (computer). This
function is active if CLK = 0 only.
Rd/Wr 0 255
mP DPHA Pixels phase adjustment (computer). Rd/Wr 0 31
yp PRES PRESET. Rd/Wr 0 1
1 = PRESET action (automatic reset).
AUDIO COMMANDS
AV AVOL Master volume adjustment. Rd/Wr 0 255
+ AVOL Increase the master volume. Rd/Wr 0 255 10+ : increase the master volume of 10 steps.
- AVOL Decrease the master volume. Rd/Wr 0 255 10- : decrease the master volume of 10 steps.
AO AMOD Auto follow or breakaway mode. Rd/Wr 0 1 0 = auto follow 1 = breakaway
AC ACH Audio input selection. Rd/Wr 1 4
1 = AUDIO IN #1. 2 = AUDIO IN #2
3 = AUDIO IN #3 4 = AUDIO IN #4
AL ALVL Audio level (works with PC command). Rd/Wr 0 63
AB ABAL Audio balance (works with PC). Rd/Wr 0 63
AM AMUT Audio mute. Rd/Wr 0 1 0 = MUTE OFF 1 = MUTE ON
NOTE: Rd/Wr = Read and write command. Rd = Read only command.