OCTO range
Chapter 6 : LCD FUNCTIONS DESCRIPTION (continued)
PAGE 23
5
[
AUDIO
]
+
ENTER.
5-1
[
master volume
]
+
ENTER.
Adjust the audio output level with
+
ENTER.
5-2
[
audio source
]
+
ENTER.
Select an item with
+
ENTER
:
•
[
auto follow
]
= The audio follows the video image.
•
[
input --
]
=
The selected audio input (is permanently diffused).
5-3
[
audio level
]
+
ENTER.
This function allows to separately adjust the level of each audio input. Adjust the level with
+
ENTER.
NOTE
: This function acts on the selected (diffused) audio input.
5-4
[
audio balance
]
+
ENTER.
This function allows adjusting for each input the audio balance. Adjust the level with
+
ENTER.
NOTE
: This function acts on the selected (diffused) audio input.
5-5
[
mic. control
]
+
ENTER.
Select an item with
+
ENTER
:
5-5-1
[
tone
]
+
ENTER.
Adjust the microphone tone with
+
ENTER.
5-5-2
[
compression
]
+
ENTER.
Select an item with
+
ENTER.
•
[no] =
linear output versus input.
•
[2/1] =
the output is compressed in order to reduce the dynamic.
5-5-3
[
noise gate
]
+
ENTER.
Adjust the noise gate threshold with
+
ENTER.
NOTE:
This function eliminates very low noises.
5-5-4
[
voice over
]
+
ENTER.
This menu is available with the voice over option only (OPT-VOV802).
This option allows to automatically tone down the audio background when the microphone is used. Select an
adjustment with
+
ENTER.
5-5-4-1
[
threshold
]
+
ENTER.
Adjust the threshold level of the toning down with
+
ENTER.
5-5-4-2
[
depth
]
+
ENTER.
Adjust the toning down level with
+
ENTER.
5-5-4-3
[
release time
]
+
ENTER.
Adjust the release time of the audio background with
+
ENTER.
•
[fast] =
0.5 second.
•
[slow] =
2 seconds.
5-6
[
mute off
]
+
ENTER.
Switch ON or OFF the audio output
.
Validate with
ENTER.
Summary of Contents for OCP802
Page 44: ......
