The RCS software for your
Eikos LE
can be viewed as the software version of the
Eikos LE
front
panel menu section. It allows you to quickly access all of the
Eikos LE
functions via a single page
interface, and easily edit your settings directly from your laptop or PC.
Before starting with the RCS software, you must establish a connection from your laptop to the
Eikos LE
you wish to run.
Software overview
The RCS software for your
Eikos LE
is composed of several easily identified sections. The tabs menu
allows you to navigate through the equivalent of the
Eikos LE
front panel menu items (see also “
The
EIKOS LE Menu
” p.60). The green window of the RCS represents your Preview window, and can
be used to parameter sources, frames, layers and logos directly by clicking on the corresponding
button, then navigating through the different available tabs. The red window of the RCS represents
your Main window, and can also be used much like the front panel of the
Eikos LE.
Create user presets directly in the RCS main window by clicking on one of the four available Preset
icons and setting up your preset in the Preview window. Clear unwanted steps with the clear button,
reload a fresh copy of your screen via the Reload Main button, make smooth takes directly with your
mouse or trackpad with the virtual T-bar. The Take button will allow you to view any change made to
your Preview screen on your Main screen. Analog Way engineers have even implemented a Stepback
button to quickly move back to your previous setup in the case of a manipulation error. The status
section allows for easy monitoring of the connection status.
70
