Analog Devices ICE-100B, User Manual

Page: 14 / 32

USB Installation Tasks
1-4 ICE-100B Emulator User Guide

4. Connect the USB cable between the ICE-100B emulator and a
USB port of your computer.
5. Verify driver installation. Refer to “Verifying Driver Installation”
on page 1-4 .

Before connecting to a target, see the power-up/down procedures
in
“Attaching to the Emulation Target” on page 1-6 .
Verifying Driver Installation
Before using the ICE-100B emulator, verify that the driver software is
installed properly.
Open the Windows Device Manager and verify that the ICE-100B
emulator appears under ADI Development Tools , as shown in Figure 1-2
Table 1-2. JP2 Settings
Jumper Operating System
Uninstalled Windows
Installed Linux