Analog Devices ICE-100B, User Manual

Page: 16 / 32

Attaching to the Emulation Target
1-6 ICE-100B Emulator User Guide

Attaching to the Emulation Target
The final step is to connect the 14-pin header (J1) of the ICE-100B emu-
lator to the target board via the JTAG interface. The 14-pin connector is
keyed at pin 3 on the emulator connector to ensure that the signals mate
correctly with the 14-pin target emulation header. The target board
should also have pin 3 of the JTAG interface connector cut. Refer to
Figure 1-3 for J1 pinout information.
Figure 1-3. J1 Pinout