Analog Devices ICE-100B, User Manual

Page: 13 / 32

ICE-100B Emulator User Guide 1-3

Getting Started
Note: If you connect the ICE first, before installing Vi+,
the Windows driver wizard will not be able to find the drivers to
install for the emulator to function.
2. Select the operating voltage of the target DSP JTAG interface. The
ICE-100B emulator ships with a jumper on positions 1 and 3, and
2 and 4, by default.


Refer to Table 1-1 and Figure 1-1 .
3. Ensure that JP2 does not have a jumper across the pins for
Windows mode. Refer to Table 1-2 . There may be a jumper
hanging off one pin; this will not impact operation.
Table 1-1. Specifying the Operating Voltage
Target Voltage JP1 Settings (Installed Jumpers)
3.3 volts 1 and 3, 2 and 4
2.5 volts 1 and 2, 3 and 4
1.8 volts 3 and 5, 2 and 4
Figure 1-1. JP1 Pinout