Analog Devices ICE-100B, User Manual

Page: 21 / 32

ICE-100B Emulator User Guide 2-1

2 HARDWARE DESCRIPTION
This chapter describes the hardware design of the ICE-100B emulator and
includes the following sections:
• “LEDs” on page 2-1

Describes LEDs which inform you of the emulator’s status.
• “Resetting the Target” on page 2-2

Describes how to reset the target.
• “Designing Custom Processor Boards” on page 2-4

Describes concerns regarding board lay out.
• “Mechanical Specifications” on page 2-4

Provides dimensional information.
LEDs
Three LEDs are located on the ICE-100B emulator (refer to Figure 2-1 ):
• PWR LED - The Power LED signifies that the ICE is powered.
• MON LED - The Monitor LED signifies that the ICE is config-
ured over USB.
• STAT LED - The Status LED signifies that the ICE is ignoring the
EMU signal.